Pioneer PDP-42MXE10 Service Manual Download Page 126

Page: 126 / 184

PDP-425CMX

126

• Diagnosis of the shutdown

Frequency of Flash-

ing of Green LED

Shutdown Operation

Defective Assy

Reason for Shutdown

Point to be Checked

Possible

Defective Part

Remarks

Communication failure in panel

drive IC

DIGITAL

Failure in panel drive IC or defective peripheral circuits

SQ ASIC BLOCK, PANEL FLASH BLOCK

IC3401,IC3151

DIGITAL

Writing failure of panel drive IC

IC3401,IC3151

After turning the unit on again, check if the data on the version can be

read with the QS1 command.

IIC communication failure of the

module (Check the shutdown

subcategory on the Factory

menu.)

DIGITAL

Communication failure in EEPROM (4k) or defective peripheral circuits

MODULE UCOM BLOCK

IC3156

DIGITAL

Failure in the DAC IC or defective peripheral circuits

MODULE UCOM BLOCK

IC3157

DIGITAL

Communication failure in EEPROM (2k) or defective peripheral circuits

OB AUDIO

IC3161

DIGITAL

Failure in Temp Sensor IC or defective peripheral circuits

OB AUDIO

IC3158

Abnormality in RST2

DIGITAL

Defective DC-DC converter

DIGITAL DD CON BLOCK

U3601, IC3401

Check if 3.3V and 1.2V are activated. (not short-circuited) No 8-V power input

to the DC/DC converter. A defective IC3401 may be the cause.

DIGITAL

Failure in the RST IC

PANEL FLASH BLOCK

IC3302,IC3304

POWER SUPPLY

12V power not booted

POWER SUPPLY

Panel having higher temperature

PANEL SENSOR

Failure in thermister or defective peripheral circuits

Temperature sensor

IC3158,IC3151

If this pattern of flashing occurs even when the panel temperature has not clearly reached the

specified one, possible causes are a defective IC3158 temperature sensor, defective soldering

of IC3158, broken TEMP1 signal line, and defective soldering between IC3158 and IC3151.

Panel having higher temperature

Surrounding temperature

Sensor temperature 75ºC (TEMP1)

Audio failure

Speaker short-circuited

Speaker terminals

Check if the speaker cables are in contact with the chassis, etc.

AUDIO

Defective AMP IC

IC3002

AUDIO

Defective AUDIO CONTROL IC

IC3001

MAIN

Defective buffer

IC5306

AUDIO

Disconnection of connector

CN9001-CN3004

Check if the connector is disconnected or not securely connected.

Communication failure in module

microcomputer

DIGITAL

Communication failure of the module microcomputer or defective peripheral circuits

MODULE UCOM BLOCK

IC3151

Check if the communication lines (TXD0/RXD0) are shorted or opened.

Failure in writing in the module microcomputer

MODULE UCOM BLOCK

IC3151

Disconnection of connector

CN9001-CN8502

Check if the connector is disconnected or not securely connected.

Not used

IIC communication failure

MAIN

Communication failure of EEPROM

IC9508

VIDEO SLOT 1 or 2

Communication failure of VIDEO SLOT IC1 (CVBS)

IC1 (Y/C) BLOCK

IC6255

VIDEO SLOT 1 or 2

Communication failure of VIDEO SLOT IC1 (Y/C)

IC1 (CVBS) BLOCK

IC6107

MAIN

Communication failure of A/D Main (A system)

IC6501

MAIN

Communication failure of A/D Sub (Bsystem)

IC6701

MAIN

Communication failure of IC6

IC6301

VIDEO SLOT 1 or 2

Communication failure of VIDEO SLOT EEPROM

IC6257

AUDIO

Communication failure of AUDIO CONTROL IC

IC3001

MAIN

Communication failure of extension I/O2

IC5304

Not used

Fan failure

FAN

Failure in the fan motor or fan stopped by attached dust.

Disconnection of connector

CN9003, CN9004, FAN wires (FA,FB) relay part

Check if the connector is disconnected or not securely connected.

Unit having higher temperature

SENB, SENC, SEND

Use in high temperature environment

Surrounding temperature

Sensor temperature is a high temperature

SENB, SENC, SEND

Defective the sensor IC

Temperature sensor

IC1001, IC1101, IC1201

Disconnection of connector

CN1001, CN1101, CN1201, CN9501, wires

Check if the connector is disconnected or not securely connected.

Not used

Failure of the power supply voltage

POWER SUPPLY

Power failure

Pins 1 to 3 of PN1

POWER SUPPLY

Check if 3.3V is activated. (not short-circuited)

Not used

Others

Failure of 12V line circuit

Check the short-circuit point of 12V line circuit.

Failure of 13.5V and 6.5V line circuits

Check the short-circuit points of 13.5V and 6.5V line circuits.

Summary of Contents for PDP-42MXE10

























































































































































































Search results

Summary of Contents for PDP-42MXE10

Reviews:

Related manuals for PDP-42MXE10

Brands by name

Popular brands

Pioneer PDP-42MXE10, Service Manual

Search results

Summary of Contents for PDP-42MXE10

Reviews:

Related manuals for PDP-42MXE10

Brands by name

Popular brands