Pioneer PDA-5002, Service Manual

Page: 140 / 183

140
PDP-503CMX, PDP-503MXE, PDA-5002
1
Remove the three screws.
2
2
Loosen a rivet.
3
3
Remove the Lead Cover MX.
Turn it not to press the rivet.
(Because when the rivet presses,
fit in once again.)
It is easy to remove when pull out
the Lead Cover MX with the rivet
before completely removing the rivet.
Rivet
4
Pull out a Flexible Cable.
5
5
Remove bottom by the fulcrum at the top of Front Case (50).
6
6
Remove the Front Case (50).
×
3
×
2
9
8
×
2
8
×
2
8
8
7
Remove the Rear Case 50 (M). (Screws
×
20)
8
Remove the Y DRIVE Assy.
(Connector, Screws
×
8)
9
Reverse the SCAN (A) and SCAN (B) Assemblies.
10
When it is necessary, exchange the ROM.
Y DRIVE, SCAN (A), (B) Assy
1
Front Case 50 (M)
Front Case 50 (M)
Aluminum
Materials
It is the structure that a hook of
Front Case (50) was put between
with Rear Case and aluminum materials.
Rear Case
Y DRIVE Assy
Lead Cover
MX
Lead Cover
MX
SIDE KEY
Assy
SCAN (A) Assy
ROM ×
6
SCAN (B) Assy
9
×
2
8
4 4