Pioneer PDA-5002, Service Manual

Page: 123 / 183

123
PDP-503CMX, PDP-503MXE, PDA-5002
GWB (Get White Balance):
Output data to be related to picture quality / white balance
• Transmit data according to transmission order and size of the table below.
• Except each normal operation mode / RS-232C integrator adjustment / RS-232C factory adjustment mode, command is invalid.
• In the normal operation / RS-232C integrator adjustment mode, output two data of the current signal mode in the current input function
and integrator area of current color mode.
• In the RS-232C factory adjustment mode, output data of factory RGB2.
(Note 1) Setting data to be unrelated to current input function / input signal / setting output dummy data (*).
(Note 2) When performed in reference mode selection, offset data outputs the same value as the reference data.
Order Data Contents Size Remarks
1
CONTRAST
3 byte
2 3 byte (Note 2)
3
BRIGHT
3 byte
4 3 byte (Note 2)
5
COLOR
3 byte (Note 1)
6 3 byte (Note 2)
7
TINT
3 byte (Note 1)
8 3 byte (Note 2)
9
R HIGH
3 byte
10 3 byte (Note 2)
11
G HIGH
3 byte
12 3 byte (Note 2)
13
B HIGH
3 byte
14 3 byte (Note 2)
15
R LOW
3 byte
16 3 byte (Note 2)
17
G LOW
3 byte
18 3 byte (Note 2)
19
B LOW
3 byte
20 3 byte (Note 2)
21 H.ENHANCE (H.SHARP) 3 byte
22 V.ENHANCE (V.SHARP) 3 byte