Pioneer PDA-5002, Service Manual

Page: 120 / 183

120
PDP-503CMX, PDP-503MXE, PDA-5002
GAS (Get Adjust Slot):
Output data to be related to picture quality setting
• Transmit data according to transmission order and size of the table below.
• Data are SLOT sections of the factory menu.
• When current input function is except for VIDEO input of SLOT system, command is invalid.
• When SLOT is not connected or external SLOT is connected, command is invalid.
• Command is invalid except RS-232C factory adjustment mode.
Data Power Down Point
0 Nothing
1 Y-DRIVE
2 Y-DC/DC CONVERTER
3 X-DC/DC CONVERTER
4 X-DRIVE
5 Power supply
6 ADDRESS junction
7 ADDRESS resonance
8 DC/DC CONVERTER (DIGITAL)
Order Data Contents Size Remarks
1
Y-DELAY
(Reference data) 3 byte
2 (Offset data) 3 byte (Note 1)
3
Y-OUT LEVEL
(Reference data) 3 byte
4 (Offset data) 3 byte (Note 1)
5
CD TINT
(Reference data) 3 byte
6 (Offset data) 3 byte (Note 1)
7
CDR OFFSET
(Reference data) 3 byte
8 (Offset data) 3 byte (Note 1)
9
CDB OFFSET
(Reference data) 3 byte
10 (Offset data) 3 byte (Note 1)
11
R-Y LEVEL
(Reference data) 3 byte
12 (Offset data) 3 byte (Note 1)
13
B-Y LEVEL
(Reference data) 3 byte
14 (Offset data) 3 byte (Note 1)
(Note 1) : When performed in reference mode selection, offset data outputs the same value as the reference data.
(Note) Refer to the following table about contents of PD information