Surround sound settings
08
45
En
English
Français
Deutsch
Nederlands
Italiano
Español
2
Select ‘Virtual SB’, then press
ENTER.
3
Select a setting.
Select one of the following:
•
Vir.SB On
– Virtual Surround Back is
always used (for example, on 5.1 encoded
material).
•
Vir.SB Off
– Virtual Surround Back mode
is switched off.
The
V.SB
indicator lights when Virtual
Surround Back is active.
4
Press to exit.
LFE Attenuate
Some Dolby Digital and DTS audio sources
include ultra-low bass tones.
Set the LFE attenuator as necessary to prevent
the ultra-low bass tones from distorting the
sound from the speakers.
1
Open the ‘Sound Setup’ menu.
2
Select ‘LFE ATT’, then press ENTER.
3
Select a setting.
Select one of the following:
•
0dB
– The LFE is not limited, which is the
recommended value.
•
-10dB
– The LFE is limited by the respective
degree.
•
LFE Off
– No sound is output from the LFE
channel.
4
Press to exit.
DTS CD setting
If you play a DTS-encoded CD, you will need to
change this setting to hear the decoded signal.
1
Open the ‘Sound Setup’
menu.
2
Select ‘CD Type’, then press ENTER.
3
Select a setting.
Select one of the following:
•
Normal CD
– Use for playback of regular
audio CDs. Some DTS-encoded CDs will
output noise when played.
•
DTS-CD
– Use for playback of DTS-
encoded CDs, but note that the beginning
of regular CD tracks may be skipped.
4
Press to exit.
ENTER
ENTER
SETUP
TOOLS
ENTER
ENTER
ENTER
SETUP
TOOLS
ENTER
ENTER
ENTER
LX03BD_1.book Page 45 Monday, July 28, 2008 2:12 PM
