Speaker Setup Guide (LX03BD)
02
18
En
Front surround setup:
Caution
• Do not attempt to carry the speakers when
they are connected with the bracket. Doing
so may cause damage to the bracket or
worsen damage to the bracket and
speakers in the event they are dropped.
3
Connect the speaker system.
Refer to
Connecting up
on page 26 to connect
the speakers properly. After connecting
everything, place the speakers as shown in the
diagram above for optimal surround sound.
After placing the speakers, run the Auto
MCACC setup (page 29) to complete your
surround sound setup.
Using the supplied speaker stands
When setting up the front surround, the
supplied accessory speaker stand can be used.
Apply the non-skid pads (for speaker stand) to
the four corners of the speaker stand and set
the speakers on the stand.
Bracket
Center
speaker
Surround
speaker
Center
speaker
Surround
speaker
Left
Green
Green
Blue
Grey
Right
Screw
Speaker stand
Non-skid pads
(for speaker stands)
LX03BD_1.book Page 18 Monday, July 28, 2008 2:12 PM
