Listening to your system
05
33
En
English
Français
Deutsch
Nederlands
Italiano
Español
Using Front Stage Surround
Advance
(LX03BD model only)
The Front Stage Surround Advance modes are
effective when you are using the Front
surround setup as described on page 16.
•
Press to select a Front Stage
Surround Advance mode.
The
F.S.SURR
indicator lights. You cannot
switch between modes for some audio
streams.
1
Press repeatedly to select:
•
F.S.S.Focus5.1
– Use to provide a rich
surround sound effect directed to the
center area where the left and right
speakers sound projection converges.
•
F.S.S.Wide5.1
– Use to provide a surround
sound effect to a wider area than
F.S.S.Focus5.1
mode.
•
Extra Power
– Outputs stereo sound (in
the case of multichannel sources, down-
mixed stereo sound) from the surround
speakers for powerful stereo effect.
Listening in stereo
You can listen to any source — stereo or
multichannel — in stereo. When playing a
multichannel source, all channels are
downmixed to the front left/right speakers and
the subwoofer.
In the Auto level control stereo mode (A.L.C.),
this unit equalizes playback sound levels if
each sound level varies with the music source
recorded in a portable audio player.
•
Press repeatedly to select Stereo or
A.L.C. mode.
•
Stereo
– The
STEREO
indicator will light
and ordinary stereo sound will be
produced.
•
A.L.C.
– Listening in Auto level control
stereo mode. The
STEREO
and
ALC
indicators will light.
Listening with headphones
When headphones are connected, only the
Stereo
,
A.L.C.
and
PhonesSurround
modes
are available.
•
With headphones connected, press
SURROUND to select Stereo or A.L.C., or
press ADV SURR to select PhonesSurround.
•
Stereo
– See
Listening in stereo
above
•
A.L.C.
– See
Listening in stereo
above
•
PhonesSurround
– Virtual surround
sound for headphones.
Using the Sound Retriever
When audio data is removed during the MP3 or
WMA compression process, sound quality
often suffers from an uneven sound image. The
Sound Retriever feature employs new DSP
technology that helps bring CD quality sound
back to compressed two channel audio by
restoring sound pressure and smoothing
jagged artifacts left over after compression.
•
Press while listening to a stereo
source.
1
Press repeatedly to switch between:
•
Retriever On
— Switches the Sound
Retriever on. The
S.RTRV
indicator lights.
•
Retriever Off
— Switches the Sound
Retriever off.
ADV SURR
SURROUND
Note
1 This setting cannot be used with multichannel or 88.2 kHz/96 kHz sources.
SOUND
RETRIEVER
LX03BD_1.book Page 33 Monday, July 28, 2008 2:12 PM
