Pioneer LX03BD Operating Instructions Manual Download Page 127

Page: 127 / 132

Additional information

127

When connected using an HDMI cable

Files recorded on
discs cannot be
played.

Is the disc one that is playable
on this player?

Check whether the disc is one that can be played on this
player (page 71).

Is the file one that is playable on
this player?

• Check whether the file is one that can be played on this
player (page 74).
• Check whether or not the file is damaged.

Is the file protected by DRM?

Files protected by DRM cannot be played (not including
DivX VOD files).

A message indicating
low memory (local
storage) appears
while playing a BD-
ROM disc.

Erase the BDMV data (page 87).

Problem

Check

Remedy

HDMI indicator does
not light.

Is the input of the connected
HDMI device properly set?

Read the HDMI device’s operating instructions and set the
input properly.

Is a DVI device connected?

Read the DVI device’s operating instructions and check
whether it is compatible with HDCP.

No picture is
displayed.

Is the HDMI indicator lit?

• If the HDMI indicator is not lit, read the HDMI device’s
operating instructions and switch to the proper input.
• If the HDMI indicator is lit, use

OUTPUT RESOLUTION

switch the output video resolution (page 87).

Are the terminals for outputting
video signals properly set?

Press

VIDEO SELECT

to switch the

HDMI OUT

terminal.

Is the resolution properly set?

Depending on the output video resolution setting, the
picture may not be output. Use

OUTPUT RESOLUTION

switch the output video resolution (page 87).

Is the HDMI cable properly
connected?

• Insert the cable firmly and all the way in.
• With some cables, 1080p video signals cannot be properly
output.

Is a DVI device connected?

The picture may not be displayed properly if a DVI device is
connected.

Is the HDMI cable damaged?

If the cable is damaged, replace it with a new one.

Pictures do not
display properly on
the TV.

Change the

HDMI Color Space

setting (page 111).

No sound is
produced.

Is a DVI device connected?

The sound will not be output from the

HDMI OUT

terminal

if a DVI device is connected. Connect the device to a

DIGITAL OUT

(OPTICAL)

terminal or the

AUDIO OUT (2 ch)

terminals.

Problem

Check

Remedy

LX03BD_2.book Page 127 Monday, July 28, 2008 4:30 PM

Summary of Contents for LX03BD





































































































































Search results

Summary of Contents for LX03BD

Reviews:

Related manuals for LX03BD

Brands by name

Popular brands

Pioneer LX03BD, Operating Instructions Manual

Search results

Summary of Contents for LX03BD

Reviews:

Related manuals for LX03BD

Brands by name

Popular brands