Listening to your system
05
31
En
English
Français
Deutsch
Nederlands
Italiano
Español
Chapter 5
Listening to your system
Important
• This unit’s audio function may be restricted
depending on the sound source, Line
Output setting (page 48), and HDMI audio
setting (page 51). In this event, the menus
may not appear, or a message may be
displayed instead (page 62).
Auto listening mode
The Auto listening mode is the simplest way to
listen to any source as it was mastered: the
output from the speakers mirrors the channels
in the source material.
•
LX03BD model only:
If you set up the system
for Front surround (page 16), the Front
Stage Surround modes will give the best
results (page 33).
•
Press to select the Auto listening
mode.
1
• When playing stereo sources, the
STEREO
indicator will light. The
2
D
indicator will
light when playing a Dolby Surround sound
source.
Listening in surround sound
You can listen to stereo or multichannel
sources in surround sound. Surround sound is
generated from stereo sources using one of
the Dolby Pro Logic decoding modes.
•
LX03BD model only:
If you set up the system
for Front surround (page 16), the Front
Stage Surround modes will give the best
results (page 33).
•
Press repeatedly to select a
listening mode.
1
The choices that appear in the display will vary
according to the type of source that’s playing.
With two channel sources
, you can select from:
•
Auto
– See
Auto listening mode
above
•
2
PL II Movie
(Dolby Pro Logic II Movie)
2
–
5.1 channel surround sound, especially
suited to movie sources
•
2
PL II Music
(Dolby Pro Logic II Music)
2
–
5.1 channel surround sound, especially
suited to music sources; see
Dolby Pro
Logic II Music settings
below
•
2
Pro Logic
(Dolby Pro Logic)
2
– 4.1
channel surround sound for use with any
two-channel source
•
Stereo
– See
Listening in stereo
on page 33
•
A.L.C.
– See
Listening in stereo
on page 33
With multichannel sources
, you can select
(according to format):
•
Auto
– See
Auto listening mode
above
•
Stereo
– See
Listening in stereo
on page 33
•
A.L.C.
– See
Listening in stereo
on page 33
Note
1 • If the source is Dolby Digital or DTS, the corresponding indicator lights in the front panel display.
• During 88.2 kHz/96 kHz source playback, the listening mode is fixed to
Auto
and cannot be changed.
SURROUND
2 The
2
PL II
indicator will light.
SURROUND
LX03BD_1.book Page 31 Monday, July 28, 2008 2:12 PM
