DVR-533H-S
73
5
6
7
8
5
6
7
8
C
D
F
A
B
E
[Tips]
If the power is not correctly turned on or when the power is shut off during downloading, proceed as follows before
performing download again:
• In a case where downloading was incorrectly terminated while "DOWNLOAD-1" was displayed on the FL display:
The EPG Library (program code) will not be downloaded to HDD correctly.
Download from the disc again.
When it is unable to download, or not operating correctly, replace the HDD.
• In a case where downloading was incorrectly terminated while "DOWNLOAD-2" was displayed on the FL display:
The SYSCON program will not function correctly.
If the program cannot be downloaded from the disc or through serial communication, replace the FLASH ROM
(IC1102 : MAIN ASSY).
• In a case where downloading was incorrectly terminated while "DOWNLOAD-3" was displayed on the FL display:
The DRIVE program will not function correctly.
If the program cannot be downloaded from the disc or through serial communication, replace the DRIVE Assy.
• In a case where downloading was incorrectly terminated while "DOWNLOAD-5" was displayed on the FL display
The program for the IR microcomputer will not function correctly.
If the program cannot be downloaded from the disc, replace the IRCON
microcomputer (IC3401 : MAIN ASSY).
• In a case where downloading was incorrectly terminated while "DOWNLOAD-4" was displayed on the FL display
The program for the tuner microcomputer will not function correctly.
If the program cannot be downloaded from the disc or through serial communication, replace the TUNERCON
microcomputer (IC101 : JACB ASSY).
The setting way to shipping mode (Reference)
At
2
lines of the [Procedures], press "OPEN/CLOSE" button while pressing REC STOP button.
4
Press a " ESC " button, then press " DISP " button on the remote control unit for servicing.
5
Confirm a firmware release version.
6
Press " ESC " button on the remote control unit for servicing in order to exit the test mode.
(1)
(2)
Summary of Contents for DVR-531H-S
Page 17: ...DVR 533H S 17 5 6 7 8 5 6 7 8 C D F A B E ...
Page 41: ...DVR 533H S 41 5 6 7 8 5 6 7 8 C D F A B E I CN4501 To HDD CN9014 H 4 5 ...
Page 47: ...DVR 533H S 47 5 6 7 8 5 6 7 8 C D F A B E SIDE B SIDE B TUNB ASSY A A A CN101 VNP2004 A ...
Page 59: ...DVR 533H S 59 5 6 7 8 5 6 7 8 C D F A B E SIDE B SIDE B I I POWER SUPPLY UNIT I ...