67
Error. If you have replaced your car or steering wheel con-
trol, please press “Reset” to clear existing settings or press
“Cancel” to re-try
Failed to set the steering wheel control.
— Touch [
RESET
] to clear existing settings or [
Cancel
] to set
again.
Error. Please press the steering wheel remote button, oth-
erwise the button you pressed will not be usable.
The time-out occurred.
— Retry.
Disc
Error-02-XX/FF-FF
The disc is dirty.
— Clean the disc.
The disc is scratched.
— Replace the disc.
The disc is loaded upside down.
— Check that the disc is loaded correctly.
There is an electrical or mechanical error.
— Press the
RESET
button.
Different Region Disc
The disc does not have the same region number as this
product.
— Replace the DVD with one bearing the correct region
number.
Unplayable Disc
This type of disc cannot be played on this product.
— Replace the disc with one that can be played on this
product.
Unplayable File
This type of file cannot be played on this product.
— Select a file that can be played.
Skipped
The inserted disc contains DRM protected files.
— The protected files are skipped.
Protect
All the files on the inserted disc are embedded with DRM.
— Replace the disc.
This DivX rental has expired.
The inserted disc contains expired DivX VOD content.
— Select a file that can be played.
Video resolution not supported
Files that cannot be played on this product are included in
the file.
— Select a file that can be played.
Unable to write to flash memory
The playback history for VOD contents cannot be saved for
some reason.
— Retry.
— If the message appears frequently, consult your dealer.
Your device is not authorized to play this DivX protected
video.
This product’s DivX registration code has not been author-
ised by the DivX VOD contents provider.
— Register this product to the DivX VOD contents provider.
Video frame rate not supported
DivX file’s frame rate is more than 30 fps
.
— Select a file that can be played.
Audio Format not supported
This type of file is not supported on this product.
— Select a file that can be played.
External storage device (USB, SD)
Error-02-9X/-DX
Communication failed.
— Turn the ignition switch OFF and back ON.
— Disconnect the USB storage device.
— Change to a different source. Then, return to the USB
storage device.
Unplayable File
This type of file cannot be played on this product.
— Select a file that can be played.
Security for the connected external storage device (USB, SD)
is enabled.
— Follow the external storage device (USB, SD) instructions
to disable security.
Skipped
The connected external storage device (USB, SD) contains
DRM protected files.
— The protected files are skipped.
Protect
All the files on the connected external storage device (USB,
SD) are embedded with DRM.
— Replace the external storage device (USB, SD).
Incompatible USB
The connected USB storage device is not supported by this
product.
— Disconnect your device and replace it with a compatible
USB storage device.
Incompatible SD
The SD memory card is not supported by this product.
— Remove your device and replace it with a compatible SD
memory card.
— Format the SD memory card. It is recommended that you
use SD Formatter for formatting SD memory cards.
Check USB
The USB connector or USB cable has short-circuited.
— Check that the USB connector or USB cable is not caught
in something or damaged.
The connected USB storage device consumes more than
maximum allowable current.
— Disconnect the USB storage device and do not use it. Turn
the ignition switch to OFF, then to ACC or ON and then
connect a compliant USB storage device.
HUB Error
The connected USB hub is not supported by this product.
— Directly connect the USB storage device to this product.
No Response
This product cannot recognise the connected USB storage
device.
— Disconnect the device and replace it with another USB
storage device.
Video resolution not supported
Files that cannot be played on this product are included in
the file.
— Select a file that can be played.
USB1 was disconnected for device protection. Do not re-in-
sert this USB memory into the unit. Press reset to restart
USB memory.
(
USB2 was disconnected for device protection. Do not re-in-
sert this USB memory into the unit. Press reset to restart
USB memory.
)
The USB connector or USB cable is short-circuited.
— Check that the USB connector or USB cable is not caught
in something or damaged.
The connected USB storage device consumes more than
maximum allowable current.
— Disconnect the USB storage device and do not use it. Turn
the ignition switch to OFF, then to ACC or ON and then
connect a compliant USB storage device.
The USB interface cable for iPod / iPhone is short-circuited.
— Confirm that the USB interface cable for iPod / iPhone or
USB cable is not caught in something or damaged.
Audio Format not supported
This type of file is not supported on this product.
— Select a file that can be played.
Positioning is not possible due to hardware error. Please
consult your dealer or local authorised service centre.
The location display is not possible due to hardware failure.
— Contact your dealer or an authorised Pioneer Station for
assistance.
No GPS antenna. Check connection.
GPS reception is lost.
— Check the aerial connection. If the message fails to disap-
pear even after the engine is switched off/on, contact your
dealer or an authorised Pioneer Station for assistance.
GPS antenna problem detected. Contact dealer or service
center.
GPS aerial lead is short-circuited.
— Contact your dealer or an authorised Pioneer Station for
assistance.
Calibration will start, but may be inaccurate without speed
pulse.
The speed pulse sensor is not connected correctly.
— Contact your dealer or an authorised Pioneer Station for
assistance.
Sensor error. Please contact your dealer or Pioneer Service
Center.
An error has occurred with the sensor.
— Contact your dealer or an authorised Pioneer Station for
assistance.
Detected unusual speed pulses.
The speed pulse cannot be detected correctly.
— Contact your dealer or an authorised Pioneer Station for
assistance.
Detected changes in the installation angle or position. The
in-dash receiver is updating the sensor learning data.
Changes in the installation angle or position are detected.
— Wait until the sensor learning finishes.
Speed pulse wire is not connected. The system will operate
in simple hybrid mode.
Speed pulse wire is not connected.
— The speed pulse cannot be detected if the speed pulse
wire is not connected correctly.
67
< CRB4783-A >
Appendix
Appendix
