Pioneer AVH-X6800DVD, Owner'S Manual

Page: 10 / 204

10
Switching the speaker mode
To change the speaker mode, you need to restore this product to
the default settings.
1 Restore the default setting.
 Refer to Restoring the default settings on page 49
Adjusting the LCD panel angle
Important
 If you can hear the LCD panel knocking against your
vehicle’s console or dashboard, touch the flip down
temporarily key from the flap menu to temporarily level
the LCD panel.
 When adjusting the LCD panel angle, be sure to adjust
from the flap menu. Forcibly adjusting the LCD panel by
hand may damage it.
1 Press and hold OPEN / CLOSE to display the flap
menu.
2 Touch the tilt down key or tilt up key to adjust
the LCD panel to an easily viewable angle.
Laying the panel down.
Returning the panel to the upright position.

As the set angle is saved, the LCD panel will
automatically be adjusted to the same position
the next time the LCD panel is opened.
Inserting/ejecting/connecting
media
CAUTION
Do not insert anything other than a disc into the disc-loading
slot.
Inserting and ejecting a disc
Inserting a disc
1 Insert a disc into the disc-loading slot.
Ejecting a disc
1 Press button to eject a disc.
Plugging and unplugging a USB stor-
age device
p
This product may not achieve optimum performance with
some USB storage devices.
p
Connection via a USB hub is not possible.
p
A USB cable is required for connection.
1 Pull out the plug from the USB port of the USB
cable.
2 Plug a USB storage device into the USB cable.
2
1
1
USB cable
2 USB storage device
Check that no data is being accessed before pulling out the
USB storage device.
On first-time startup
1 Start the engine to boot up the system.
The “ Select Program Language ” screen appears.
p
From the second time on, the screen shown will differ
depending on the previous conditions.
2 Touch the language.
3 Touch
.
The “ Speaker Mode Settings ” screen appears.
4 Touch the speaker modes.

Standard Mode
4-speaker system with front and rear speakers, or a
6-speaker system with front and rear speakers and
subwoofers.

Network Mode
3-way system with a high range speaker, middle range
speaker and subwoofer (low range speaker) for reproduction
of high, middle and low frequencies (bands).
WARNING
Do not use the unit in standard mode when a speaker system
for 3-way network mode is connected to this unit. This may
cause damage to the speakers.
5 Touch [ OK ].
The “ Smartphone Setup ” screen appears.
6 Touch the item.

Refer to Information on the connections and functions for
each device on page 20
7 Touch .
The top menu screen appears.
p
Once the speaker mode is set, the setting cannot be
changed unless this product is restored to the default
settings. Restore the default settings to change the speaker
mode setting.
 Refer to Restoring the default settings on page 49
10 < CRD4918-A > < CRD4918-A >
Basic operation Basic operation