piezosystemjena d-Drive pro, Instruction Manual

Page: 60 / 79

Geschäftsführer: Dr. Bernt Götz • Telefon 03641/66880 • Fax 03641/668866 • www.piezosystem.de
60
gfkt internal function generator 0 = off
1 = sine
2 = triangle
3 = rectangle
4 = noise
5 = sweep
6 = arbitrary
7 = vektor r/w
gasin generator amplitude sine 0 to 100 [%] r/w
gosin amplitude offset sine 0 to 100 [%] r/w
gfsin generator frequency sine 0.1 to 10000 [Hz] r/w
grsin Gen. sine starting angle 0 to 2
π [rad]
r/w
gcsin Gen. sine number of cycles 0 to 2
32
-2 default=0 (permanent) r/w
gatri generator amplitude triangle 0 to 100 [%] r/w
gotri amplitude offset triangle 0 to 100 [% r/w
gftri generator frequency triangle 0.1 to 10000 [Hz] r/w
gstri symmetry of triangle 0.1 to 99.9 [%] default = 50 % r/w
grtri Gen. triangle starting angle 0 to 2
π [rad]
r/w
gctri Gen. triangle number of cycles 0 to 2
32
-2 default=0 (permanent) r/w
garec generator amplitude rect. 0 to 100 [%] r/w
gorec amplitude offset rectangle 0 to 100 [%] r/w
gfrec generator frequency rectangle 0.1 to 10000 [Hz] r/w
gsrec symmetry of rectangle 0.1 to 99.9 [%] default = 50 % r/w
grrec Gen. rectangle starting angle 0 to 2
π [rad]
r/w
gcrec Gen. rectangle number of cycles 0 to 2
32
-2 default=0 (permanent) r/w
ganoi generator amplitude noise 0 to 100 [%] r/w
gonoi amplitude offset noise 0 to 100 [%] r/w
gaswe generator amplitude sweep 0 to 100 [%] r/w
goswe amplitude offset sweep 0 to 100 [%] r/w
gsswe Gen. sweeping starting frequency 1.0 <= gsswe <= 10.0kHz r/w
geswe Gen. sweeping end frequency 1.0 <= gsswe < geswe <= 10.0kHz r/w
gtswe Gen. sweeping time 0.4 to 800 [s] r/w
gcswe Gen. sweeping number of cycles 0 to 2
32
-2 default=0 (permanent) r/w
gmswe Gen. sweeping marker starting
frequency 1.0 <= gsswe <= 10.0kHz r/w
gnswe Gen. sweeping marker end
frequency 1.0 <= gsswe < geswe <= 10.0kHz r/w
garbload Gen. arbitrary file loading garbload,path\file name w
gsarb Gen. arbitrary starting index 0 to 1000001 r/w
gearb Gen. arbitrary end index 0 to 1000001 r/w
gcarb Gen. arbitrary number of cycles 0 to 2
32
-2 default=0 (permanent) r/w
gtarb Gen. arbitrary output factor 1 to 2
32
-2 r/w
goarb Gen. arbitrary offset 0 to (gearb - gsarb) r/w
gvecload Gen. vector file loading gvecload,channel,path\file name w
gcvec Gen. vector number of cycles 0 to 2
32
-2 default=0 (permanent) r/w
grun Generators start/stop alone or
synchronously grun,channel1,channel2,channel3
0 = stop
1 = start r/w