Geschäftsführer: Dr. Bernt Götz • Telefon 03641/66880 • Fax 03641/668866 • www.piezosystem.de
54
actuator displacement
+10V
0V
closed loop
Upos (0)
Umon
open loop
Upos source
Umon
+10V
0V
actuator displacement
actuator displacement
open loop
Upos fitted (6)
open loop
closed loop
fitted
sketch 4: monitor output
7; Ipa1 The
directly
measured
actuator
current
output
(output
end
stage1).
-500 to +500mA corresponds to 0V to +10V monitor voltage.
8; Upa2 The directly measured actuator current output (output nanoX end stage) (see point 6)
9; Ipa2 The directly measured actuator current output (output nanoX end stage) (see point 7).
The default setting is the position value in closed loop (0).
9.
communication
9.1.
communication via RS232
The
d-Drive
pro
can easily communicate with your PC with the use of a terminal program (for
example “hypertrm.exe” with Windows XP, please refers to your operating system’s manual).
A serial connection cable (included) is required to connect to your computer. The following settings
are needed:
