User Manual
M110T0032-EN, valid for M-110.xxx1 / M-111.xxx1 / M-112.xxx1
MMa 20. September 2018
Physik Instrumente (PI) GmbH & Co. KG, Auf der Roemerstrasse 1, 76228 Karlsruhe, Germany
Page 8 / 26
Phone +49 721 4846-0, Fax +49 721 4846-1019, Email
,
www.pi.ws
Position of the holes for mounting from above
Procedure
1.
Move the platform with the help of the controller or as follows, by hand so that one
mounting hole can be used:
a)
Insert the AF 1.5 hex key into the drive screw inlet.
b)
Turn the hex key until the mounting hole is exposed completely.
2.
Place the positioner onto the surface so that its mounting holes are in line.
