User Manual
M110T0032-EN, valid for M-110.xxx1 / M-111.xxx1 / M-112.xxx1
MMa 20. September 2018
Physik Instrumente (PI) GmbH & Co. KG, Auf der Roemerstrasse 1, 76228 Karlsruhe, Germany
Page 11 / 26
Phone +49 721 4846-0, Fax +49 721 4846-1019, Email
,
www.pi.ws
Mounting the Payload on the Platform
NOTICE
Excessively long screws!
The positioner can be damaged by screws that are inserted too deeply.
Note the depth of the mounting holes in the platform.
Only use screws with the correct length for the respective mounting holes.
Requirements
The distance between the center of gravity of the payload and the center of the
platform is as small as possible in all directions.
At least two points are provided for mounting the payload on the platform (ideally:
three attachment points).
The position of the mounting holes in the payload and platform match.
Take the inner thread's depth in the platform of 4 mm when choosing the length of the
screw.
Tools and accessories
Mounting screws: At least 2 M3 screws of suitable length
Suitable screwdriver
Procedure
1.
Bring the corresponding mounting holes in line for the payload and the platform.
2.
Use the mounting screws to affix the payload (tightening torque: Max. 1.5 Nm).
3.
Check that the payload is attached firmly to the platform of the positioner.
