User Manual
M110T0032-EN, valid for M-110.xxx1 / M-111.xxx1 / M-112.xxx1
MMa 20. September 2018
Physik Instrumente (PI) GmbH & Co. KG, Auf der Roemerstrasse 1, 76228 Karlsruhe, Germany
Page 13 / 26
Phone +49 721 4846-0, Fax +49 721 4846-1019, Email
,
www.pi.ws
4.
Connect the controller to the corresponding power adapter.
5.
Use the power cord to connect the power adapter to the mains supply.
C-863.11 / C-884 DC motor controller
1.
Connect the plug on the adapter cable (C-815.LDM1) to the "Motor" socket on the
controller. The UNC nuts must be removed from the plug (turn the knurled screws
counterclockwise) before connecting directly to the controller.
2.
Optionally, if the attached cable is not long enough: Connect the socket of adapter
cable to the plug on the extension cable.
3.
Connect the positioner's plug to the socket on the extension cable or respectively the
adapter cable.
4.
Tighten the screws on all connectors used.
5.
Connect the controller to the corresponding power adapter.
6.
Use the power cord to connect the power adapter to the mains supply.
