User Manual
M110T0032-EN, valid for M-110.xxx1 / M-111.xxx1 / M-112.xxx1
MMa 20. September 2018
Physik Instrumente (PI) GmbH & Co. KG, Auf der Roemerstrasse 1, 76228 Karlsruhe, Germany
Page 10 / 26
Phone +49 721 4846-0, Fax +49 721 4846-1019, Email
,
www.pi.ws
Mounting from below
The platform may
not
be moved when mounting from below.
Tools/accessories
M2 mounting screw. When selecting the screw length, take the length of the screw, the
depth of the hole in the surface and the depth of 4 mm of the inner thread in the base
body into consideration.
Screwdriver respectively hex key according to the screw type selected (hex key AF 1.5 in
the scope of delivery)
Surface with holes corresponding to the geometry shown below.
1.
Place the positioner onto the surface so that its mounting holes are in line.
2.
Tighten the 4 mounting screws completely.
3.
Check that the positioner is firmly attached to the surface.
