User Manual
M110T0032-EN, valid for M-110.xxx1 / M-111.xxx1 / M-112.xxx1
MMa 20. September 2018
Physik Instrumente (PI) GmbH & Co. KG, Auf der Roemerstrasse 1, 76228 Karlsruhe, Germany
Page 9 / 26
Phone +49 721 4846-0, Fax +49 721 4846-1019, Email
,
www.pi.ws
3.
Tighten the mounting screws but do not overtighten.
The head of the screw may not protrude.
Otherwise, the platform could be damaged
during motion.
4.
Proceed with the second mounting screw according to the above-mentioned steps.
5.
Move the platform so that the first mounting screw that was inserted is exposed.
6.
Tighten the mounting screws but do not overtighten (
max. torque is 1.5 Nm
).
7.
Repeat steps 5 and 6 accordingly for the remaining screws.
8.
Check that the positioner is affixed firmly to the surface.
