phyCARD-M [PCA-A-M1-xxx]
8
©
PHYTEC Messtechnik GmbH 2010 L-750e_1
phyCARD boards achieve their small size through modern SMD
technology and multi-layer design. In accordance with the complexity
of the module, 0402-packaged SMD components and laser-drilled
microvias are used on the boards, providing phyCARD users with
access to this cutting edge miniaturization technology for integration
into their own design.
The phyCARD-M is a subminiature (60 x 60 mm) insert-ready Single
Board Computer populated with the Freescale i.MX35
microcontroller. Its universal design enables its insertion in a wide
range of embedded applications.
Precise specifications for the controller populating the board can be
found in the applicable controller Reference Manual or datasheet. The
descriptions in this manual are based on the Freescale i.MX35. No
description of compatible microcontroller derivative functions is
included, as such functions are not relevant for the basic functioning
of the phyCARD-M.
The phyCARD-M offers the following features:
•
Subminiature Single Board Computer ( 60 x 60 mm) achieved
through modern SMD technology
•
Populated with the Freescale i.MX35 microcontroller (BGA400
packaging)
•
Improved interference safety achieved through multi-layer PCB
technology and dedicated ground pins
•
X-Arc bus including commonly used interfaces such as Ethernet,
USB, UART, SPI, I
2
C, audio, display and camera connectivity
(both LVDS) available at one 100-pin high-density (0.635 mm)
Molex connector, enabling the phyCARD-M to be plugged like a
"big chip" into target application
•
Max. 532 MHz core clock frequency
•
Boot from NAND Flash
•
128 MByte (up to 1 GByte) on-board NAND Flash
1
•
32 MByte (up to 256 MByte) DDR 2 SDRAM on-board
•
4KB (up to 32kB) I
2
C EEPROM
1
Please contact PHYTEC for more information about additional module configurations.