phyCARD-M [PCA-A-M1-xxx]
17.2.4
Jumpers
The phyCARD Carrier Board comes pre-configured with 2 removable
jumpers (JP) and 3 solder jumpers (J). The jumpers allow the user
flexibility of configuring a limited number of features for development
constraint purposes.
Table 32
below lists the 5 jumpers, their default
positions, and their functions in each position.
Figure 16
depicts the
jumper pad numbering scheme for reference when altering jumper
settings on the development board. Note that pin 1 is always marked
by a square footprint in the jumper location diagrams that follow.
Figure 17
provides a detailed view of the phyBase jumpers and their
default settings.
Before making connections to peripheral connectors it is advisable to
consult the applicable section in this manual for setting the associated
jumpers.
e.g.: JP1
e.g.:
e.g.: J1
Figure 16: Typical jumper numbering scheme
Table 32
provides a comprehensive list of all Carrier Board jumpers.
The table only provides a concise summary of jumper descriptions.
For a detailed description of each jumper see the applicable chapter
listing in the right hand column of the table.
78
©
PHYTEC Messtechnik GmbH 2010 L-750e_1
