Enable this function, users can use mobile phone ,
[Gateway RTP port forwarding]
RealPlayer or QuickTime Player to visit the camera from Internet through the router.
30000—30200 default. (See TCP/IP setup)
[External RTP port range]
Click
to confirm your setting.
Apply
Click
at the top right of
page to show the System information.
System
Settings
Section 3 - Advanced Configuration
If UPnP works, clicking on the camera’s “system” menu at the top of the setting screen
will show something like the following in the UPnP section:
UPNP
121.35.168.19
Success
Status:
Gateway external IP address:
Gateway external port:
Internet URL:
8150
http://myphylinkcam.3322.org:8150
Note: If UPnP did not work, and if you have an up to date router other than Apple
Airport, it is worth double checking if UPnP is enabled in your router. Some Routers
like the ActionTec and Westell units distributed for free with Verizon and Qwest DSL
service have the feature initially disabled. Usually it is very simple to enable UPnP.
You just need to log in to your router’s setup screen and find the UPnP
menu. Then you click on enable, save the setting and restart both the router and
the camera (in that order).
Many routers may need a firmware update for UPnP to be available or work properly.
You should look up your router’s model number on your router manufacturer’s
support web page to see if updates are available.
PHYLINK Cube HD User Manual
58