Disable power LED light
Camera Setup
System:
Enable privacy mode
Volume:
Light frequency:
Enable image mirror
Enable image flip vertical
60Hz
Camera:
Microphone:
8
Speaker:
8
Volume:
Enable
Disable
Enable
Disable
Apply
Section 3 - Advanced Configuration
Camera Setup
From the home page click
button and enter the administrator user name
setting
and password. Click on
under the title
to change the
Camera Setup
Camera
image and audio parameters of the camera.
The video of camera display always a static colored stripes
[Enable privacy mode]
for protecting your privacy.
The Status LED will been power off.
[Disable power LED light]
Two options: 50Hz & 60Hz. Set according to the mains
[Light frequency]
frequency in the country of use.
For UK this would be 50Hz. For US this would be 50Hz.
Turn on/off the built-in microphone.
[Microphone]
Adjusts the volume of the microphone from 0~14 where 0 is the
[Mic volume]
lowest.
Click
to confirm your settings.
Apply
Camera
Camera Setup
Stream Setup
OSD Setup
Night Vison Setup
PHYLINK Cube HD User Manual
45
