Section 3 - Advanced Configuration
TCP/IP Setup
The camera is set up to obtain the IP address automatically (DHCP) by default.
Should you may wish to assign the IP address manually, use the
page to
TCP/IP Setup
enter the address details.
Obtain an IP address automatically(DHCP):
If your network supports a DHCP server (e.g. router) select this option to have the IP
address is assigned automatically.
If you select
you should select Obtain a DNS
Obtain an IP address automatically
Server address automatically.
Use the following IP address
Select this option when a fixed IP is required.
Type the IP address of your camera.
[IP address]
Type the subnet mask.
[Subnet mask]
Type the default gateway.
[Default gateway]
Obtain DNS Server address automatically
If your network supports a DHCP server (e.g. router) select this option to have the
DNS Server address is assigned automatically.
Use the following DNS server address:
Type the IP address of the primary DNS server.
[Primary DNS IP address]
Type the IP address of the secondary DNS server,
[Secondary DNS IP address]
if necessary.
The default HT TP port number is 80, it is also be used as RTSP port.
[HTTP/RTSP port]
It is for UPnP port forwarding, 1 camera actually use 2 RTP ports,
[RTP port range]
one for video, the other for audio. (See UPnP setup)
Select Basic Authentication or Digest Access
[HTTP/RTSP Authentication method]
Authentication.
PHYLINK Cube HD User Manual
53