Phoenix Contact UM IA THERMOMARK X1.1, User Manual

Page: 118 / 130

THERMOMARK X1.1
5-4
PHOENIX CONTACT 103180_00_ia
The
Status print
contains the following information:
Table 5-2 Information contained in the
Status print
Symbol Information
– Device type
– Version and creation date of the firmware
– Version and creation date of the bootloader
Current values of the selected local settings (see page 3-8)
Current values of the selected machine parameters (see page 3-9)
Current values of the selected print parameters (see page 3-10)
Current values of the selected interface parameters (see page 3-11)
PIN activation status (see page 3-7)
– Service life
– Number of printed labels
– Printed length in thermal transfer mode and direct thermal mode
– Current measured values of the printhead temperature and heat voltage
– Information on the operating points of the label edge sensor
Line pattern The bottom of the
Status print
features lines of various thicknesses, printed at various intervals; these
lines are used to evaluate the print quality.