Phoenix Contact RFC 4072S, User Manual, Page: 267 / 272

Appendix: revision history
108580_en_02 PHOENIX CONTACT
267 / 272
E Appendix: revision history
Revision Date Contents
01 2019-05-09 First publication of the user manual for the RFC 4072S.
02 2020-03-03 Revision with the following changes:
Terminology updated (safety-related, power supply, touch screen display/display,
PLCnext Engineer).
Inner cover
page
Added note box: Observe controller firmware.
Section 2.1 Section added: Function extensions using PLCnext apps
Section 2.9.3 Section “Safety PLC (...)”: “SPNS” replaced by “iSPNS 3000”.
Section 2.12 Table 2-10 “Operating modes of the RFC”: Explanation of the MRESET
operating mode corrected.
Section 2.14 Table 2-11 “Storage of firmware components in the root file system” updated.
Section 7.12 OPC UA
Note box updated: Link to the PLCnext Community added.
Section 8.3.1 System variable: iSPNS 3000 temperatur status register (STATUS_REG)
Description of diagnostic codes added.
Section 8.3.3 Added note box: “Warning: Outputs can be set”
Section 8.5 System variable: PLC_CRC_PRJ
Information about the CRC of the non-safety-related project
Section 10.1 Technical Data
– Power supply
– Connection data for COMBICON connectors:
Correction of the „Conductor cross-section [AWG]“ value.
– IEC 61131 runtime system
– Programming system: Information corrected.
– Number of control tasks: Value corrected.
– Ambient conditions
– Degree of protection: UL information added.
– Air pressure (operation): Value range corrected.
– Resistance to gases...: Translation correction:
Use of the device in these ambient conditions is prohibited.
– Safety characteristics data in acc. with EN ISO 13849:
– PFH
D
added.
– UL: Additional information added.
– UL Warning Instructions added.
Section 10.2.5 Documentation
– PLCnext Technology: Information updated.
– Security: Information updated.