Phoenix Contact RFC 4072S, User Manual, Page: 252 / 272

RFC 4072S
252 / 272
PHOENIX CONTACT 108580_en_02
C 2.3 Startup and parameterization
Refer to the online help for the PLCnext Engineer software.
Checklist for startup and parameterization of the RFC 4072S
Device type / equipment identification
Version:
HW/FW
HW/FW (iSPNS 3000)
Date
Editor Test engineer
Comment
No
.
Requirement Yes Comment
1 Have the systematic “Programming” and “Startup” checklists been
observed?
2 Was startup completed according to the specifications (specifications
from the planning phase and/or according to the RFC 4072S user man-
ual, see Table 4-1 “Steps for initial startup of the RFC 4072S” )?
3 Is it ensured that when the supply voltage of the RFC 4072S is switched
on, automatic startup does not cause a hazardous movement on the
machine/system?
Date Signature (editor)
Date Signature (test engineer)
WARNING: Preventing automatic startup
Take appropriate measures to ensure that automatic startup
of your system/machine is prevented.