Phoenix Contact RFC 4072S, User Manual, Page: 223 / 272

Technical data and ordering data
108580_en_02 PHOENIX CONTACT
223 / 272
10 Technical data and ordering data
10.1 Technical data
General data
Dimensions without fan (width x height x depth) 122 mm x 182 mm x 173 mm
Dimensions with fan (width x height x depth) 122 mm x 220 mm x 173 mm
Weight without fan 2.85 kg, approximately
Weight with fan 3.08 kg, approximately
Mounting type DIN rail (TH 35-15 according to DIN EN 60715), e.g.,
NS 35/15… from Phoenix Contact
Touch screen display
Type TFT LCD, resistive
Resolution 240 x 320 pixels
Diagonal 8.9 cm (3.5”)
Operation With the finger or a pen with a rounded end
NOTE: Damage to the display
Pointed or sharp-edged objects or tools can cause irreparable damage to the display.
Power supply
WARNING: Loss of electrical safety and the safety function when using unsuitable power supplies
The RFC 4072S is designed exclusively for protective extra-low voltage (PELV) operation in accordance with
EN 60204-1. Only PELV in accordance with the listed standard may be used for the supply.
The following applies to the PROFINET network and the I/O devices used in it:
Only use power supplies that meet EN 61204 and feature safe isolation and PELV according to
EN 50178/VDE 0160 (PELV). These prevent short circuits between primary and secondary sides.
Please also refer to the information in Section “Electrical safety” on page 15 .
Select the correct power supplies
Refer to the information on selecting the power supply in Section “Electrical safety” on page 15 .
Only use power supplies with safe isolation with 24 V DC.
Use a power supply without fall-back characteristic curve (see Section “Power supply” on page 62 ).