Phoenix Contact RFC 4072S, User Manual, Page: 245 / 272

System-specific checklists
108580_en_02 PHOENIX CONTACT
245 / 272
15 Has the location where the software is to be installed (e.g., on the system
PC) been specified?
16 Are measures planned which prevent unintentional, automatic restart
with hazardous states?
17 Are measures planned to ensure unique F-Addresses throughout the
network (F-Source Addresses of PROFIsafe devices and F-Destination
Addresses of safety-related PROFINET controllers (iSPNS 3000))?
18 Does the planned use correspond to the intended use of the system?
19 Has the technical data of the PROFIsafe system been observed?
20 Have the requirements of the PROFINET Installation Guideline for
Cabling and Assembly been observed and met during planning?
21 Have the accessories to be used been planned (e.g., cables, connec-
tors)?
22 Are the period of use / proof test intervals and maintenance intervals of
the PROFIsafe devices used known and documented?
23 Is the assignment of responsibility for subsequent phases of life speci-
fied (e.g., for assembly/installation/programming/startup/validation,
etc.)?
Name/company:
24 Are measures planned against unauthorized network access?
Date Signature (editor)
Date Signature (test engineer)
No
.
Requirement Yes Comment