Phoenix Contact IB IL 24 PSDO 8-PAC, User Manual

Page: 8 / 112

IB IL 24 PSDO 8-PAC
8 / 112
PHOENIX CONTACT 7619_en_05
1.3 General safety notes
Requirements Knowledge of the following is required:
– The non-safety-related target system (e.g., INTERBUS, PROFIBUS, PROFINET)
– The INTERBUS-Safety, SafetyBridge or PROFIsafe system
– The components used in your application
– The Inline product range
– Operation of the software tools used
– Safety regulations in the field of application
Qualified personnel In the context of the use of the INTERBUS-Safety, SafetyBridge or PROFIsafe system, the
following operations may only be carried out by qualified personnel:
– Planning
– Configuration, parameterization, programming
– Installation, startup, servicing
– Maintenance, decommissioning
This user manual is therefore aimed at:
– Qualified personnel who plan and design safety equipment for machines and systems
and are familiar with regulations governing occupational safety and accident preven-
tion.
– Qualified personnel who install and operate safety equipment in machines and sys-
tems.
In terms of the safety notes in this application description, qualified personnel are persons
who, because of their education, experience and instruction, and their knowledge of rele-
vant standards, regulations, accident prevention, and service conditions, have been autho-
rized to carry out any required operations, and who are able to recognize and avoid any pos-
sible dangers.
Documentation You must observe all information in this user manual as well as in the documents listed in
Section “Documentation” on page 13.
Safety of personnel and
equipment
The safety of personnel and equipment can only be assured if the safety module is used
correctly (see Section “Intended use” on page 12).
Error detection Depending on the wiring and the corresponding setting of the safe output module parame-
ters, the INTERBUS-Safety, SafetyBridge or PROFIsafe system can detect various errors
within the safety equipment.
WARNING: Depending on the application, incorrect handling of the safety module
can pose serious risks for the user
When working with the safety module within the INTERBUS-Safety, SafetyBridge, or
PROFIsafe system, please observe all safety notes included in this section.