Phoenix Contact IB IL 24 PSDO 8-PAC, User Manual

Page: 31 / 112

Product description
7619_en_05 PHOENIX CONTACT
31 / 112
2.9.3 PROFIsafe (PROFIBUS, PROFINET)
The module occupies four words in the Inline system. The way in which these words are
mapped in the higher-level control system is specific to the controller used and is described
in the quick start guide for the controller.
2.10 Programming data / Configuration data
2.10.1 Local bus (INTERBUS)
2.10.2 Other bus systems (PROFIBUS, PROFINET)
Operating mode INTERBUS-Safety SafetyBridge PROFIsafe
Mode switch Mode 1 Mode 2 Mode 1
ID code AF
hex
(175
dec
) A7
hex
(167
dec
) CB
hex
(203
dec
)
Length code 03
hex
(03
dec
) 04
hex
(04
dec
) 04
hex
(04
dec
)
Input address area 1 word Controller-specific Controller-specific
Output address area 1 word Controller-specific Controller-specific
Parameter channel (PCP) 0 word 0 word 1 word
Register length 3 words 4 words 4 words
The PCP channel is only used internally.
INTERBUS-Safety:
The process data input word is specified for internal use only.
The programming data/configuration data is defined in the device description (FDCML,
GSD, GSDML, etc.) according to the bus or network used.