Phoenix Contact IB IL 24 PSDO 8-PAC, User Manual

Page: 83 / 112

Technical data and ordering data
7619_en_05 PHOENIX CONTACT
83 / 112
Resistance of the housing material to fungal decay Resistant
Ambient compatibility Not resistant to chloroform
Connection data for Inline connectors
Connection method Spring-cage terminal blocks
Conductor cross section 0.2 mm
2
to 1.5 mm
2
(solid or stranded), 24 - 16 AWG
Supported stop category according to EN 60204 0
1 im fehlerfreien Zustand
General data (Fortsetzung)
Mechanical requirements
Vibration according to IEC 60068-2-6 Operation: 2 g, Criterion A
Shock according to IEC 60068-2-27 15 g over 11 ms, Criterion A
Safety characteristic data according to IEC 61508/EN 61508
Achievable SIL SIL 2 (single-channel)
SIL 3 (two-channel)
Depends on the parameterization and wiring (see Section
“Connection options for actuators depending on the param-
eterization” on page 22, Section “Connection examples for
safe outputs” on page 55)
Probability of a dangerous failure on demand by the safety
function (PFD)
SIL 2: 1% of 10
-2
, maximum (corresponds to 1 x 10
-4
)
SIL 3: 1% of 10
-3
, maximum (corresponds to 1 x 10
-5
)
Probability of a dangerous failure per hour for the entire mod-
ule (PFH)
SIL 2: 1 % of 10
-6
maximum (corresponds to 1 * 10
-8
)
SIL 3: 1 % of 10
-7
maximum (corresponds to 1 * 10
-9
)
Depends on the parameterization (see Table 6-3 on
page 57)
Hardware fault tolerance (HFT) of the module 1
Permissible duration of use 20 a
Safety characteristic data according to EN 62061
Achievable SIL Claim limit SILCL = SIL 2 (single-channel)
SILCL = SIL 3 (two-channel)
Depends on the parameterization and wiring (see Section
“Connection options for actuators depending on the param-
eterization” on page 22, Section “Connection examples for
safe outputs” on page 55)
Safe failure fraction (SFF) 99 %
Probability of a dangerous failure per hour for the entire mod-
ule (PFH)
SIL 2: 1 % of 10
-6
maximum (corresponds to 1 * 10
-8
)
SIL 3: 1 % of 10
-7
maximum (corresponds to 1 * 10
-9
)
Depends on the parameterization (see Table 6-3 on
page 57)
Hardware fault tolerance (HFT) of the module 1
Permissible duration of use 20 a