- 66 -
o
Navigate to the [Sound] [Advanced]
menu
o
You will see below items:
o
[Surround Mode]: Select the sound
effect for the internal TV, you can
choose [Stereo] or [DTS TruSurround]
o
[Auto
volume]:
Select
[DTS
TruVolume] or [Night mode] if you
want to enable to level out sudden
volume differences or [Off] if you want
to disable
o
[Clear Sound]: Select if you want to
enable Clear Sound to improve the
sound for speech [On] or [Off] if you
want to disable
o
[Audio Out Format]: Set the audio out
signal of the TV to fit with the sound
capabilities of the connected Home
Theatre
System
to
[Stereo
(uncompressed)],
[Multichannel],
[Multichannel (bypass)] or [Dolby
Digital Plus]
o
[Audio Out Leveling]: Select the level
out of the volume of the Home Theatre
System and the TV when switching
over from one to the other to [More],
[Medium] or [Less]
o
[Audio Out Delay]: Switch the delay if
a sound delay is set on the Home
Theatre System to [On] or [Off]
o
[Audio Out Offset]: Set an audio offset
by changing the slider value if you
cannot set a sound delay on the Home
Theatre System
Note: This can only be changed if
[Audio Out Delay] is set to [On]
6.15.3
Audio Language Preference
o
Navigate to the [Audio Language
Preference] menu
o
You will see below items:
o
[Primary Audio]: Select the highest
preference for audio language in
broadcast
o
[Secondary Audio]: Select the next
preference for audio language in
broadcast
Note: For all the above items, make
your selection and press “OK” to
confirm you selection
