- 29 -
frequency set here. If nothing is found it
will scan between 44 MHz and 887 MHz
in steps of 8MHz. So if you do a playout
on another frequency as set in the TV,
the TV will do a fallback scan in order to
find it
o
[Scan Mode]:Define when the TV shall
scan the RF stream for updates
When [Legacy] is selected, then the
RF scan for upgrades will happen 5
minutes after the TV is set to STBY,
1PM and at 4AM when the TV is not
in use.
When [Standby] is selected, the TV
will scan continuously when the TV
is in standby
When [Standby and On] is selected,
the TV will scan continuously when
the TV is in standby and also when
in on state
Note: in order to set the [Scan Mode],
the TV must be in [Fast] mode. In Green
mode, the TV will always follow the
[Legacy] scanning
Note: TV will stop the upgrade if TV
would be woken up by the guest during
the upgrade
6.4
Switch on settings
o
Navigate to the [Switch On Settings]
menu, you will see the screen on the left
o
In this menu you will be able to set all
Switch on settings, these are the menu
items that a guest can change, the values
you set here are the settings applied when
the guest wakes up the TV
6.4.1
Channel Settings
o
Navigate to the [Channel Settings] [Switch
On Channel Filter] menu
o
You will see a list of channel filters, your
selection will be the default selected
channel filter when opening the channel
list
