- 48 -
o
[Analogue: Manual Installation]: This
can be used to manually search for
analogue channels. You can set the
[System]
you
need,
[Search
Channels] where you can set the
frequency you want to search. Once a
channel is found you can [Store
Current Channel] or [Store as New
Channel]
o
Navigate to the [Channel Settings] menu
o
You will see below items:
o
[EPG]:
[Enable]: You can enable EPG via
[Yes] or disable via [No]
[Source]: The EPG data can come
[From the Internet] or [From the
Broadcaster]
Note: [Source] is only accessible
when [Enable] is set to [Yes]
o
[Enable Subtitles]: You can enable the
subtitles via [Yes] or disable via [No]
o
[Enable Teletext]: You can enable
teletext via [Yes] or disable via [No]
o
[Enable MHEG]: You can enable MHEG
via [Yes] or disable via [No]
o
[Enable HbbTV]: You can enable HbbTV
via [Yes] or disable via [No]
o
[Enable CI/CI+]: TV shall disable the
CI/CI+ conditional access support, all UI
elements relating to the CI/CI+ shall be
removed if [No] is selected, if [Yes] is
selected, then all CI/CI+ functionality
shall be available
o
[Enable FreeView Play]: You can
enable FreeView Play via [Yes] or
disable via [No]
o
[Enable Channel Logos]: Channel logos
will be shown if [Yes] or will not be
shown if [No]
o
[Display Scrambled Channel Banner]:
If a channel is scrambled, you will get
an OSD with this information if [Yes] or
OSD will not be shown if [No]
o
[IGMP Version for Multicast IP
Channels]: Set your IGMP version for
multicast to [Auto], [1], [2] or [3]
