manualshive.com logo in svg

Philips EasySense SNS210 MC, Installer/User Manual

Share
Download
Philips EasySense SNS210 MC Installer/User Manual Download Page 6

6

Typical System Components 

Several components are available to compose a system. Such as:

• Lights

These are the in-luminaire MC nodes. This can be a MC driver or a SNS MC node. There are two different SNS MC types:

-  With Bluetooth and ZigBee radio as well as occupancy and daylight sensing, such as SNS210 MC

-  With Bluetooth and ZigBee radio and no sensing (radio only), such as SNS410 MC, or wireless drivers, or wireless MC lam

• Switches

Two or four button Zigbee based switches, piezo powered (no batteries):

-  Philips branded switches

-  Compliant switches from external suppliers

• Sensors

Stand-alone Zigbee sensors for office and industry applications. Either with occupancy sensing only or with daylight harvesting as well.

They can be commissioning to a group or a zone.

• Gateways

Allowing connecting your system to the Internet. These are supplied by partners.

Summary of Contents for EasySense SNS210 MC

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands