manualshive.com logo in svg

Philips EasySense SNS210 MC, Installer/User Manual

Share
Download
Philips EasySense SNS210 MC Installer/User Manual Download Page 33

33

Project Back-up and Access Sharing (continued)

Remarks:

Back ups

•  Energy reports are not backed up in the Cloud. Therefore, after downloading a project from the Cloud, previously generated energy reports will not 

be shown. Nevertheless, when generating a new report, this report will be based on all previously generated energy data and provides accurate 

information.

•  Profiles are not part of the cloud back up process.

•  Scene parameters are stored in the devices, however, parameter settings from the app are not backed up in the cloud.

•  Daylight Areas are not backed up.

General

•  Device Wifi must be enabled (but commissioning can still take place offline).

•  Do not reset a device that is saved in the cloud. It is not removed from the project but cannot be controlled anymore.

•  To retrieve lost devices, please contact your local account manager for support.

•  This feature is not available in China.

Summary of Contents for EasySense SNS210 MC

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands