manualshive.com logo in svg

Philips EasySense SNS210 MC, Installer/User Manual

Share
Download
Philips EasySense SNS210 MC Installer/User Manual Download Page 50

50

Security

•  MasterConnect devices out of the factory start out with open interfaces for BLE and Zigbee communication for easy set up.

•   Zigbee device communications become encrypted with secret keys (AES-128) and thus, secure on the first commissioning of MasterConnect devices       

into a project.

•   Once commissioned, the MasterConnect devices from a project will only be visible on the MC App of the user that claimed it at first. Other users will 

not be able to work with these already claimed devices in the MC App.

Remark

Due to the open Zigbee interface, the MC devices may join another open (rogue) Zigbee network if significant time elapses between installation of luminaires 

and commissioning with the MC App. In this case, the MC APP will still discover these devices and allow commissioning of these devices into a proper MC 

network.

Summary of Contents for EasySense SNS210 MC

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands