manualshive.com logo in svg

Philips EasySense SNS210 MC, Installer/User Manual

Share
Download
Philips EasySense SNS210 MC Installer/User Manual Download Page 29

29

Over the Air Update

Purpose:

To enable a firmware update of MasterConnect components such as EasySense SNS210 via the app without any effect on the existing group setup.  

Such updates may include new released features, security and bug fixes. 

How to:

•   A firmware .gbl file must be stored on the smartphone.

•   Select the light for which the firmware update is required. The current firmware version appears on the screen. Choose “Update”, “Upload file”, navigate 

to the saved SNS210.gbl file on the smartphone and select it. Soon after, the upload process begins. When the upgrade is ready after a few minutes, a 

confirmation message is displayed. The new firmware version will be now visible. 

Remarks: 

•  Don’t interrupt the update process. Keep   

the smartphone in close reach of the    

 

device being updated.
•  At this moment, over the air update can    

  be done at device level only.
•  The update process may take 3 to 7   

 

  minutes depending on the smartphone    

 used.
•  When a firmware update is complete,  

 

  switch commissioning is lost. A  

 

 

  recommissioning of the switches is    

 

 required.

Summary of Contents for EasySense SNS210 MC

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands