Philips basicPalette II, Installation And Setup Gude

Page: 30 / 88

Installation & Setup Guide
Palette II Lighting Control Console
2 2
Controls
6. Playback Controls Layout
The playback section of the desk provides controls for executing active cues and fading between two pre-stored
scenes. These faders consist of A/B and C/D, automatic timed sliders.
Playbacks
• [SELECT] - Selects cue list to display and default record location. Solid amber LED indicates there is a cue list on
this playback. Flashing amber LED means this cue list is selected.
• [STOP/BACK] - Halts active cue (if running) or steps back to previous cue (if stopped).
• [GO] - Activates next cue (following the active Cue) on the Cue List. Green LED will be solid when a cue list is
active and no cues are running. The Green LED will flash when cues are running. Both the Red and Green LEDs
will flash when the cue list is releasing.
• [REL-PB] - Releases currently selected playback or cue list.
• [STEP Up] [STEP Dn] - Steps forward or backward through a selected cue list.
• Playback Faders - Controls Fade times (in/out), cross faders, intensity masters, scene masters or Look page mas-
ter. The playback faders can be setup to control different things as determined by the PaletteOS software. See "A/B
C/D" on page 54 for more details or refer to "Hardware Setup" in the PaletteOS software Help Menu .
7. Level Wheel
The console features a level wheel which provides navigation of the PaletteOS software and control of
channel attributes. The wheel is context sensitive to allow appropriate control of attributes such as one
percent, one DMX512 step, one gobo, one second of time, etc. By default, it controls the intensity level of
the selected channels. If you press and hold any of S1 through S4 when a moving light is selected, you can
also control attributes. If you select edit on any blue box, the level wheel will change that value in
consistent increments (e.g. if you are editing cue time, it will increase or decrease the time in seconds).
Holding [SHIFT] while engaging the wheel will place the wheel in Fine Mode.
REL-PB SELECT
STEP
STEP
STEP/
BACK
GO