Philips Avalon FM20, Instructions For Use Manual

Page: 88 / 221

8 Non-Stress Test Timer
88
Accessing the NST Setup Pop-up Keys
You control and set up the NST timer (for example, start, stop, or clear the timer, and set the run time)
using a selection of pop-up keys that you access via any one of three possible routes:
•
Via the
Timer
SmartKey (Route 1).
• Via the
Main Setup
SmartKey (Route 2).
• Via the NST menu entry in the menu that pops-up when you touch the top left-hand corner of the
screen (Route 3).
Via the Timer SmartKey (Route 1)
Press the
Timer
SmartKey . The
Timers
window opens, and the pop-up keys for
controlling/setting up the NST timer appear (see “Pop-up Keys for NST Timer Setup” on
page 88).
Via the Main Setup SmartKey (Route 2)
1
Enter the Main Setup menu using the SmartKey .
2 Select
NST
to enter the
Setup NST
menu. At the same time, the pop-up keys for controlling/
setting up the NST timer appear (see “Pop-up Keys for NST Timer Setup” on page 88).
Via the NST Field (Route 3)
Select the NST field displayed in the top left-hand corner of the screen (when so configured). The
pop-up keys for controlling/setting up the NST timer appear (see “Pop-up Keys for NST Timer
Setup” on page 88).
Pop-up Keys for NST Timer Setup
Pop-Up Keys Selecting this pop-up key lets you.... Comments
Start
start the timer
Stop
stop the timer, allowing either restarting after a pause
(
Start ) or clearing ( Clear key).
Setup NST
enter the
Setup NST
menu. From here you can set the
run time.
This pop-up key is not available with
Route 2, as the
Setup NST
menu is
already open.
Timer return to the Timers window. This pop-up key is not available with
Route 1, as the
Timers
window is
already open.