Philips Avalon FM20, Instructions For Use Manual

Page: 36 / 221

3 Basic Operation
36
Switching On: FM20/FM30
FM20/30 • Connect the monitor to AC mains and switch the monitor on.
• The green power-on LED comes on.
• The monitor performs a self-test as it starts up. Selftest: OK , the serial number, and revisions for
the software and firmware are printed on the fetal trace paper (if recorder
Auto Start
is configured
to
On
).
• The monitor display comes on.
• There is a start-up tone from the loudspeaker.
FM20/30
(with
Battery
Option)
• If this option has been chosen, the green power-on LED on both the External Power Supply and
the Battery LED indicator will come on.
Switching On: FM40/FM50
FM40/50 • Connect the monitor to AC mains. The green LED comes on.
• Press the On/Standby switch.
• The monitor performs a self-test as it starts up.
Selftest: OK
, the serial number, and revisions for
the software and firmware are printed on the fetal trace paper (if recorder
Auto Start
is configured
to
On
).
• The monitor display comes on.
• There is a start-up tone from the loudspeaker.
Adjusting the Display Angle (FM20/FM30)
FM20/30 You can tilt the display on the FM20 and FM30 to one of five different positions, or you can fold it
completely down. The tilt/fold mechanism works on a one-way ratchet system. You hear a click as
each of the five positions is reached. The screen can be folded back down only after tilting the display
forwards as far as it will go.
To tilt the display from the folded position:
1
Unlock the display by releasing the catch.