Philips Avalon CTS M2720A, Service Manual, Page: 7 / 110

1
1
1
General Information
This guide tells you how to service and repair the base station (M2720A) and transducers (M2725A,
M2726A, and M2727A) of the Avalon CTS Cordless Fetal Transducer System. It describes the system
hardware and software, tells you how to diagnose operating and servicing problems, and how to test the
system.
As this system is intended to be installed by the customer, refer to the Instructions for Use for details of how to
install the system. See also “Pre-Installation Considerations” on page 2.
The Avalon CTS Cordless Fetal Monitoring System Service Guide supplements the maintenance and
troubleshooting procedures, carried out by the operator, that are described in the Instructions for Use . Refer to
the Instructions for Use for maintenance and troubleshooting procedures that may be performed during
normal operation.
Only qualified service personnel should attempt to install the system, disassemble the base station, remove or
replace any internal assemblies, or replace the transducer batteries or belt buttons.
Who Should Read This Guide
This guide is for any qualified technical personnel servicing and repairing the Avalon CTS Cordless Fetal
Transducer System.
You must:
• understand English
• be familiar with standard medical equipment installation procedures
• be familiar with current conventional technical terms as used throughout this guide
What to Do Next
Familiarize yourself with the contents of this guide and the Instructions for Use before attempting to service or
repair the system.
To Purchase, Visit Avobus.com or call 1-800-674-3655