46
CHAPTER 4
THE ULTRA WIDE SCSI CONTROLLER
upper half of the WIDE SCSI bus only. One of the Fast SCSI units needs to be connected with
activated termination to the other physical end of the Fast SCSI cable. Additional Fast SCSI units
with termination deactivated can be connected to free plugs of the Fast SCSI cable.
Operation with only external SCSI units
The external connector is connected to the physical end of the WIDE SCSI cable. The CYBER-
STORM MKIII SCSI has to be connected to one of the middle plugs of the SCSI cable. An active
terminator pack has to be connected to the other end of the cable.
Operation with external WIDE SCSI units and internal WIDE SCSI units
The external connector is connected to the physical end of the WIDE SCSI cable. As long as there
are no external SCSI units attached, an external WIDE SCSI terminator plug has to be connected
to the external connector. The CYBERSTORM MKIII SCSI has to be connected to one of the midd-
le plugs of the SCSI cable. The WIDE SCSI unit has to be connected at the plug at the other end
of the internal WIDE SCSI cable with termination activated. Additional WIDE SCSI units with ter-
mination deactivated can be connected to free plugs of the WIDE SCSI cable.
Operation with external WIDE SCSI units and internal Fast SCSI units
Summary of Contents for CYBERSTORM MKIII
Page 1: ...ANWENDERHANDBUCH USERS MANUAL PAGES 29 55...
Page 29: ...NOTIZEN 27...
Page 57: ...55 NOTES...
