their prior positions. Now the installation is complete.
ADVICE
Only if your AMIGA is furnished with the Kickstart Version 3.x, the CYBERSTORM MKIII is
now immediately ready to use, and will place its performance at your disposal immediately
after the computer has been switched on.
INSTALLATION OF THE CYBERSTORM MKIII INTO AMIGA 4000T
For installation in an AMIGA 4000T, please read chapter 3.1 Internal Expansion Options in your
AMIGA user manual first. There, the installation of a processor expansion module is thoroughly
explained. Please also refer to the chapter Jumper on the main board of A4000T in your AMIGA
user manual, and make sure that the jumpers J100 and J104 are in position "EXTERNAL" or "E"!
ADVICE
In any case we strongly recommend to use the spacers supplied with the delivery, which grant
a troublefree, straight position of the CYBERSTORM MKIII within the AMIGA 4000T. (some
AMIGA 4000T coming from the production of Amiga Technologies were erroneously deliver-
ed with spacers that were too long).
37
Figure 5.
The CYBERSTORM
MKIII is ready installed.
Summary of Contents for CYBERSTORM MKIII
Page 1: ...ANWENDERHANDBUCH USERS MANUAL PAGES 29 55...
Page 29: ...NOTIZEN 27...
Page 57: ...55 NOTES...
