Mixing Pump RITMO XL FU 230V Overview – Operation
Cleaning the machine after work
2019-12-11
49
Fig. 79: Removing the mixing coil
3. Remove and clean mixing coil (4).
4. Clean mixing zone with scraper.
39.7 Insert the mixing tube cleaner
Fig. 80: Inserting the mixing tube
cleaner
1. Take out the mixing tube cleaner (1) and cleaning shaft (2) from the
holding device.
2. Insert the cleaning shaft and the cleaning tube cleaner into the
mixing tube.
NOTE:
Insert the mixing tube cleaner (1) with the scraper in
the downward direction.
3 2
4
Fig. 81: Seat of the cleaning
shaft
NOTE:
While inserting the cleaning shaft, ensure
that the cleaning shaft (2) is in the head of
the rotor (3) and while closing the motor tilt
flange, it reaches correctly into the driver
clutch (4).
39.8 Close motor tilt flange
Fig. 82: Close motor tilt flange
1. Close the motor tilt flange (1) and lock using the quick closure
(2).
2. Insert the 10-pin connector (Fig.78).
DANGER!
Risk of contusion at the motor tilt flange!
There is a risk of contusion when closing the motor
tilt flange.
Do not reach into the clamping area of the motor
tilt flange.
4
2
1
2
1
