Mixing Pump RITMO XL FU 230V Overview – Operation
Brief description
2019-12-11
21
17 Brief description
The new compact mixing pump RITMO XL with 230V AC drive, developed especially
for pumping, spraying and coating of machine-operated dry morters, pastösen
materials and many more items up to 3 mm grain size.
Depending on the requirement, the pumping capacity can be adjusted through a
quick pump change. The pneumatic filling is guaranteed via an optional injection
hood in conjunction with an adapter for the injection hood.
The machine consists of portable single components that permit a quick and
comfortable transportation for convenient dimensions and low weight.
18 Material
18.1 Flow ability / conveying property
NOTE:
The SD6-3 pump can be used at up to 20 bar operating pressure.
The D7-2,5 pump can be used at up to 25 bar operating pressure.
The possible conveying distance depends essentially on the flow properties of the
material.
Fluids, priming materials, colours etc. have good flow properties.
The material hose lengths must be shortened if the operating pressure exceeds
20/25 bar.
To avoid machine faults, increased wear and tear of the pump motor, pump shaft and
pump, please use original PFT spare parts only such as:
PFT rotors
PFT stators
PFT pump shafts
PFT material hoses.
These are made for each other and form a constructive unit with the machine.
Non-observation will not only make the warranty null and void, the user must also
contend with mortar of bad quality.
19 Mortar pressure manometer
Caution!
The use of a morter pressure manometer is
recommended for technical safety reasons.
Fig. 25: Mortar pressure manometer
PFT morter pressure manometer
Some advantages of the morter pressure manometer:
Exact regulation of the correct morter consistency.
Constant check of the correct pumping pressure.
Early detection of a blockade or overloading of the pump motor.
Creation of pressure release.
Serves to a large extent to safeguard the operators.
Long life span of the PFT pump components.
