CYLINDER HEAD/CYLINDER/PISTON
37
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
Installing the piston rings on the piston
- Proceed in the following order in order to
install the oil control rings.
• Fit the spring (1) (no special direction).
• Fit the 2 piston rings (2) on each side of the
spring offsetting the gap of each ring (no
special direction).
- Install the compression ring (3) by placing
the 2R mark upwards.
- Install the top compression ring (4) by placing
the 1R mark upwards.
Fitting the piston
- Install the piston so that the mark IN is on the
inlet side.
- Fit the gudgeon pin and circlips.
- The circlip gaps (1) must face upwards or
downwards, but under no circumstances to
the side.
Use new rings.
4
3
2
1
1
N
Summary of Contents for XS1P52QMI-4
Page 2: ......
