CYLINDER HEAD/CYLINDER/PISTON
34
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
- When re-installing, fit the valve springs, the
closest coils against the cylinder head.
- When re-installing, lubricate the 2 half
cones (1) so as to hold them in the groove of
the valve's stem.
- Do not place the 2 half cones into the cup
forcefully with the tool when decompressing
the spring.
- When re-installing the rocker pins, position the
indentation of the axles towards the outside of
the cylinder head to fit the cylinder studs.
- To assemble the holder plate, position the
rocker pins with the screwdriver slits vertical.
When re-installing, the camshaft bearings, the rocker shafts and the contact between the rockers
and the valves shall well lubricated in order to avoid any risk of seizure when starting the engine
(Use lithium soap grease). Seals and valve stems must be lubricated.
1
Summary of Contents for XS1P52QMI-4
Page 2: ......
