CRANKCASE
43
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
Checking the crankshaft and conrod
assembly
- Using a set of shims, check the big end side
play.
- The maximum side play on the conrod end
must not exceed: 0.55 mm.
The out-of-round values measured on the ends
of the crank should not exceed 0.1 mm and must
be measured:
- 80 mm from the transmission side end.
- 40 mm from the flywheel magneto end.
Replacing the lip seal
- Remove the lip seal.
- Using fitting tool P/N 757990, fit a new lightly
greased gasket (1).
90 mm
60 mm
80 mm
40 mm
1
757990
Summary of Contents for XS1P52QMI-4
Page 2: ......
